EPDM Flat Roofing Projects

This flat roof was an overboard of the existing decking, which was in OK condition, as only the roof covering had failed. This helped us keep the price and mess down for the customer, whilst still providing a professional finish with a 20-year guaranty.

We were able to install a one-piece rubber on this P-shaped roof, tying it in neatly into the rosemary tiled roof. The old chipboard decking was removed and new 18mm OSB was installed. A very professional looking finish.

Ready for an internal garage conversion, we upgraded the flat roof into an EPDM warm roof with 120mm insulation up to building regulations, with new upvc fascia and guttering on the exterior.

At Breedon Aggregates head office in Newark, we set up safety scaffolding to renovate their considerably large flat roof during a heat-wave mid summer, something we're confident could not have been done in fibreglass due to the resin hardening too fast. We conformed to very stringent significant health and safety regulations. and the head site manager was impressed with our services, leaving a glowing review.

At United Fillings main site in Billingborough, we renovated their large head office flat roof with EPDM in just 2 pieces, with a join on the centre kerb. We installed new firings to increase the roof gradient for proper water run off, and installed new 18mm OSB and 120mm insulation to conform to building regulations on UV and thermal efficiency. The staff were quickly impressed with how much cooler the room became during the summer.

A second story warm roof, which we set up scaffold for safe access. We installed 150mm insulation on this roof for maximum thermal efficiency and complimented the exterior with black ash fascia and guttering, which covered the increase in roof height perfectly. All the works were backed by the Home Pro10-year insurance backed guaranty as usual.

We were proud to work on the Lincoln Tesco construction site, where stringent health and safety measures due to large machinery were required. We worked together with multiple contractors to provide an intricate EPDM finish with multiple internal valleys.

Creek Tavern was looking for a solution to renovate their large, leaking felt flat roof. The felt system had failed, yet the existing decking was still in good condition. This enabled us to overboard the existing layer with OSB and finish with EPDM, plus all-new fascia and guttering. Safe to say the customer was extremely satisfied with the quality of work and reasonable price on such a large roof.