The Lincs Group LTD, a prestigious family run company of 30 years. Now supplying DIY & the trade
Consultation
The Lincs Group LTD, a prestigious family run company of 30 years. Now supplying DIY & the trade
Consultation
A 3m batten bar, designed to secure your EPDM when sealing to adjoining roofs or substrates.
• Must be used in conjunction with necessary fastenings, Waterblock sealant & Batten Flashing Tape.
An aluminium termination, or batten bar, for securing & anchoring your EPDM membrane.
Must be used in combination with Waterblock Sealant & your Elevate Flashing items (sold separately), to securely anchor under lead flashings, to felt joins, & below parapets & skylights.
Length: 3m
The Termination Bar (or batten bar) anchors your EPDM to the necessary substrate - such as on a felt join, on upstands, or under parapets.
More information can be found in the installation guides, but to summarise:
• Apply Waterblock Sealant under the EPDM
• Using the necessary fasteners (sold separately), secure the Batten Bar in position starting at one end & working to the other - compressing the Water Block. Don't overtighted, & wipe away excess Water Block
• Using your Quickscrub Pad & Handle, apply your Quickprimer Plus to the Batten Bar, & 75mm past either side.
• Once tacky, apply your Elevate Flashing Tape, working into place without stretching. Use your Silicone Rubber Roller & Penny Roller to fully work in.
We strongly advise reading our Deliveries & Returns information, to fully understand the delivery of your item(s).
To summarise, see below:
Order Processing:
Orders for Flat Roofing Items placed before 12pm midday, are generally processed for dispatch the same day. Orders placed after midday will be processed next day. Orders placed on bank holidays or weekends will be processed the next working day. A member of our team will update you via the contact information provided.
Delivery:
After dispatch, your order will generally be delivered the next working day. Do note, if you order other items with your roofing edge trims, such as EPDM, these may be delivered separately due to the length of the trims & courier service guidelines.
The delivery of your items will be carefully packaged, signed off, & will be delivered via a courtier network. We strongly advise being present for delivery to inspect your products & sign delivery notes. Additionally, not all courier service trucks have tail lifts, or pallet trolleys. Please be prepared with the necessary person(s) to take delivery of your items, necessary for the size of the order. Depending on the size of items ordered, they may be heavy - use proper lifting technique, we cannot be held liable for any personal injury resulting from the delivery or use of the ordered items.
Notes on the delivery of Elevate EPDM:
If you order EPDM with your trims, the rubber will be delivered rolled up for ease of transport. As a result there may be some fold creases and wrinkles - this is normal. To remedy this, the EPDM should be laid to rest, or settle, for a minimum of 1 hour. In colder temperatures, the light use of a heat gun (not a naked flame) can be used to settle the rubber. Don't overheat or touch directly.
Starting your project:
We advise not booking in or arranging an installation team to begin works before the goods have been delivered & inspected. Delays or order mistakes are rare, but can happen. We can't be liable for any costs as a result from delayed or incorrect delivery or items.