The Lincs Group LTD, a prestigious family run company of 30 years. Now supplying DIY & the trade
Consultation
The Lincs Group LTD, a prestigious family run company of 30 years. Now supplying DIY & the trade
Consultation
An 8m roll of self-adhesive tape applied to the base of your Kerb Edge Trim. Provides a water-tight seal when the tape is compressed at least 30%.
• A self-adhesive foam tape, with a tape covering over the adhesive side to maintain 'stickiness'.
• 8m Length, used in combination with kerb edge roofing trims to provide a water-tight seal when compressed at least 30%.
The self-adhesive foam tape is stuck to the base of the edge trim (also known as the underside of the 'P Section'.
Starting at one end of the kerb trim, allowing 5mm extra, peel of the protective tape and stick the tape to the base of the trim (the section to 'sit' on the EPDM).
Do not stretch the tape, & smoothly push into place as you go. Cut off any excess, leaving 5mm extra on any joints.
Ideally, the tape should be slightly more towards the outside of the base trim - ensuring it sits on the of the deck/EPDM.
We strongly advise reading our Deliveries & Returns information, to fully understand the delivery of your item(s).
To summarise, see below:
Order Processing:
Orders for Flat Roofing Items placed before 12pm midday, are generally processed for dispatch the same day. Orders placed after midday will be processed next day. Orders placed on bank holidays or weekends will be processed the next working day. A member of our team will update you via the contact information provided.
Delivery:
After dispatch, your order will generally be delivered the next working day. Do note, if you order other roofing trims with your items, these may be delivered separately due to the length of the trims & courier service guidelines.
The delivery of your items will be carefully packaged, signed off, & will be delivered via a courtier network. We strongly advise being present for delivery to inspect your products & sign delivery notes. Additionally, not all courier service trucks have tail lifts, or pallet trolleys. Please be prepared with the necessary person(s) to take delivery of your items, necessary for the size of the order. Depending on the size of items ordered, they may be heavy - use proper lifting technique, we cannot be held liable for any personal injury resulting from the delivery or use of the ordered items.
Notes on the delivery of Elevate EPDM:
If you order EPDM with your items, the rubber will be delivered rolled up for ease of transport. As a result there may be some fold creases and wrinkles - this is normal. To remedy this, the EPDM should be laid to rest, or settle, for a minimum of 1 hour. In colder temperatures, the light use of a heat gun (not a naked flame) can be used to settle the rubber. Don't overheat or touch directly.
Starting your project:
We advise not booking in or arranging an installation team to begin works before the goods have been delivered & inspected. Delays or order mistakes are rare, but can happen. We can't be liable for any costs as a result from delayed or incorrect delivery or items.