Upvc Kerb edge trim - with foam tape and pins

Main Image

Price: £15.00

A rubber roofing edge trim, designed to stop water run off and guide towards your gutter edge. 

• Supplied with the required foam tape and black polytop pins. 

• 65mm x 2500mm. 

• Available in Black & Anthracite Grey.

Please select an option from our range:

Please select a quantity:

  • Details
  • Application
  • FAQs
  • Deliveries

• A roofing edge trim, designed to act as a kerb to seal and stop water run-off. Supplied with the necessary length of foam tape & colour coded polypins.

• 2500mm Length, with 65mm height overlap over the roof edge. The unique 'P' section, sits on top of the roof deck.

• Injection moulded and using virgin-extruded plastics to form a non-brittle, consistent finish. 

• Fast and easy to install, ideal for both trade and DIY. Accessories available for seals, joins, corners and upstands. Perfect for use with EPDM and most other types of membrane.

• Available in Black & Anthracite Grey (white unavailable).

The application of the Upvc Kerb edge trim is on roofing edges where there is to be no water run off. More information can be found in the installation guides, but to summarise, see below:

Identify Kerb edges for no water run-off. Apply the supplied sticky side of your foam tape to the underside of the 'P' section of your kerb trim.

Placed the kerb trim in position, compressing tape.

Using the supplied colour coded Polypins, secure the trim in position using a clean glazing hammer.

Install any necessary joins, corners & sealants (as shown in the installation guide).

  • Can I use my own roofing edge trims?
    Of course, whilst we do advise our roofing edge trims as they're specifically designed for purpose, there are other options available, or you can create something bespoke. So long as you follow the principles of Gutter & Kerb edges for necessary water run-off into your guttering system, & don't cut the EPDM overhang too short, you're good to go!
  • Will the colour fade over time?
    Yes, slightly. Like most external material use, including UPVC, the combination of UV exposer & external elements will slightly affect the colour over time. This will not affect performance.
  • Do I still need fascia if I use roofing edge trims?
    That depends. Your roofing edge trims cover 65mm vertically. This may be enough to lap onto any existing fascia. However, if this is not enough, or you are fitting your trims to a new roof - yes - you will need some cover fascia, which needs to be installed before your trims.
  • Do I need timber battens?
    No, you don't need any timber battens with our roofing edge trims. These can be installed to a flush roof edge.
  • Does the tape have a top and bottom side?
    Yes, there is a sticky side with a film to be peeled off. This side sticks to your Kerb trim, & is the 'top' side.
  • Can I have a join in the tape?
    Yes, but the 2 separate pieces together tightly to create the seal. Then, when it's compressed at least 30%, it will provide the necessary seal. To stop shrinkage, don't stretch the tape during application to the kerb.
  • Do I use tape on kerb corners and joins?
    No you don't. When you have 2 kerbs to be joined, leave a small amount of excess tape to be housed within the joint. Your kerb corners will be held in place with Bond & Seal, or Pin/Fastening through a pilot hole. They house 'on top' of the kerb, which already has the tape under.
  • Where should be the tape be fitted?
    The tape needs to be positioned on the underside of the kerb trim, which will position onto the deck. If possible, place the tape slightly towards the outer edge of the underside, to ensure it sits on the EPDM & decking.
  • Does this trim come with corners and joins?
    No, all corners (internal & external), joins & caps are sold separately - as are additional fixings required for these accessories.

We strongly advise reading our Deliveries & Returns information, to fully understand the delivery of your item(s). 

To summarise, see below:

Order Processing:

Orders for Flat Roofing Items placed before 12pm midday, are generally processed for dispatch the same day. Orders placed after midday will be processed next day. Orders placed on bank holidays or weekends will be processed the next working day. A member of our team will update you via the contact information provided.


After dispatch, your order will generally be delivered the next working day. Do note, if you order other items with your roofing edge trims, such as EPDM, these may be delivered separately due to the length of the trims & courier service guidelines.

The delivery of your items will be carefully packaged, signed off, & will be delivered via a courtier network. We strongly advise being present for delivery to inspect your products & sign delivery notes. Additionally, not all courier service trucks have tail lifts, or pallet trolleys. Please be prepared with the necessary person(s) to take delivery of your items, necessary for the size of the order. Depending on the size of items ordered, they may be heavy - use proper lifting technique, we cannot be held liable for any personal injury resulting from the delivery or use of the ordered items.

Notes on the delivery of Elevate EPDM:

If you order EPDM with your trims, the rubber will be delivered rolled up for ease of transport. As a result there may be some fold creases and wrinkles - this is normal. To remedy this, the EPDM should be laid to rest, or settle, for a minimum of 1 hour. In colder temperatures, the light use of a heat gun (not a naked flame) can be used to settle the rubber. Don't overheat or touch directly.

Starting your project:

We advise not booking in or arranging an installation team to begin works before the goods have been delivered & inspected. Delays or order mistakes are rare, but can happen. We can't be liable for any costs as a result from delayed or incorrect delivery or items.